X2 Torch Halogen 70W Model-Specific X2 kits are plug-and-play and take into account your bike’s electrical system. Models that need it come with customized wire harness and switch. X2’s brightness punches through darkness to create an enjoyable night-time ride experience. Kits arrive with accessories custom to your models needs. X2 Model-Specific kits are plug-and-play. No cutting or splicing of wires required. The back of X2 is customized with the same connector your model bike uses. X2 is compact and self-contained with no pieces protruding in the back or light-leaks. There is an integrated cable guide to help keep the lines from rubbing. The model-specific instructions were written with your model in mind. Halogen lights can be used on most machines with a stock light and AC or DC power. Most Model-Specific X2 kits come with a custom wire harness that includes a switch. The switch is set to utilize your model’s electrical system to the best of its ability; some models can run both lights at the same time, but some can only run the high or low beam. If your bike did not come stock with a switch, one is included in the model-specific kit; either a 2- or 3-position switch. For most models, when the switch is set to low the upper 2 inch lamp’s spot beam turns on to illuminate the area ahead (the 4 inch flood lamp is more blinding because of its spread.) On high both lamps ignite to illuminate both near and distant terrain. Fits: Suzuki DRZ 400-SM/S All (For use with stock electrical system). Note: Not DOT approved. For off-road use only.
Fits: Suzuki DRZ 400-SM/S All (For use with stock electrical system)
X2 Torch Halogen 70W Model-Specific kits are plug-and-play and take into account your bike’s electrical system; Models that need it come with customized wire harness, switch, and correct connectors – no cutting or splicing required
Compact-fits tighter to forks, with an integrated brake line guide (long brake line recommended for X2 on MX bikes), using quick-release fork straps and pin-stabilization system
Dual reflector design allows for optimum illumination of both near and distant terrain, illuminating the entire environment; Light shining above the trail warns of dangerous obstacles such as tree branches
For use with stock electrical system; Not DOT approved; For off-road use only